HP Mini 311-1028TU HP Pavilion dm1 HP Mini 311 Compaq Mini 311 - Maintenance a - Page 60

Remove the 4 Phillips PM3.0×4.0 screws, that secure the hard drive bracket to the hard drive.

Get HP Mini 311-1028TU PDF manuals and user guides View all HP Mini 311-1028TU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Removal and replacement procedures 5. If it is necessary to replace the hard drive bracket or connector, follow these steps: a. Disconnect the hard drive connector 1 from the hard drive. b. Remove the 4 isolators 2 from the 4 corners of the hard drive bracket. c. Remove the 4 Phillips PM3.0×4.0 screws 3 that secure the hard drive bracket to the hard drive. d. Lift the bracket 4 straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive. 4-20 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
4–20
Maintenance and Service Guide
Removal and replacement procedures
5. If it is necessary to replace the hard drive bracket or connector, follow these steps:
a.
Disconnect the hard drive connector
1
from the hard drive.
b.
Remove the 4 isolators
2
from the 4 corners of the hard drive bracket.
c.
Remove the 4 Phillips PM3.0×4.0 screws
3
that secure the hard drive bracket to the hard drive.
d.
Lift the bracket
4
straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.