HP Mini 311-1028TU HP Pavilion dm1 HP Mini 311 Compaq Mini 311 - Maintenance a - Page 73
Remove the 4 Phillips PM2.0×7.0 screws, Flex the inside edges of the top edge
View all HP Mini 311-1028TU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Removal and replacement procedures Ä CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 5. Remove the 4 Phillips PM2.0×7.0 screws 1 that secure the display assembly to the base enclosure. 6. Lift the display assembly 2 straight up and remove it. 7. If it is necessary to replace the display bezel or any of the display assembly internal components: a. Remove the hinge covers 1. b. Flex the inside edges of the top edge 2, the left and right sides 3, and the bottom edge 4 of the display bezel until the bezel disengages from the display enclosure. c. Remove the display bezel 5. Maintenance and Service Guide 4-33