HP Model 748 HP Model 748 Service Handbook - Page 77
EISA or PCI Module Removal, Preliminary Requirements, Procedure
View all HP Model 748 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
EISA or PCI Module Removal EISA or PCI Module Removal Preliminary Requirements 1 Shut down any applications. 2 Shut down the OS. Refer to the owner's guide for information on properly shutting down HP-UX. 3 Turn power off to the Model 748. 4 Set up a static-free work place to handle the EISA or PCI card cage. 5 Disconnect power cords. Procedure 1 Remove all cables attached to card cage. 2 Loosen the two screws in handles of the EISA or PCI card cage. 3 Slide out tray (see Figure 5-18). Figure 5-18 Tray Removal 5-29
EISA or PCI Module Removal
5-29
EISA or PCI Module Removal
Preliminary Requirements
1
Shut down any applications.
2
Shut down the OS. Refer to the owner’s guide for information on properly shutting
down HP-UX.
3
Turn power off to the Model 748.
4
Set up a static-free work place to handle the EISA or PCI card cage.
5
Disconnect power cords.
Procedure
1
Remove all cables attached to card cage.
2
Loosen the two screws in handles of the EISA or PCI card cage.
3
Slide out tray (see Figure 5-18).
Figure 5-18
Tray Removal