HP Model 748 HP Model 748 Service Handbook - Page 78
EISA or PCI Converter Board and Backplane Removal,
View all HP Model 748 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
EISA or PCI Module Removal EISA or PCI Converter Board and Backplane Removal 1 Remove any cards installed in cage. 2 In an EISA card cage, remove the two HP HIL connector screws (1 in Figure 5-19) lo- cated on the front of the cage to free the connector. 3 Remove the screw (2 in Figure 5-19) on the converter board. 4 Dislodge the plastic tab from the sheet metal hook holding the backplane in place. 5 Remove the Converter board and Backplane assembly. Plastic tab Figure 5-19 EISA or PCI Converter Board and Backplane Removal 5-30
EISA or PCI Module Removal
5-30
EISA or PCI Converter Board and Backplane Removal
1
Remove any cards installed in cage.
2
In an EISA card cage, remove the two HP HIL connector screws (1 in Figure 5-19) lo-
cated on the front of the cage to free the connector.
3
Remove the screw (2 in Figure 5-19) on the converter board.
4
Dislodge the plastic tab from the sheet metal hook holding the backplane in place.
5
Remove the Converter board and Backplane assembly.
Figure 5-19
EISA or PCI Converter Board and Backplane Removal
Plastic tab