HP Model 748 HP Model 748 Service Handbook - Page 81
VME Backplane Removal, Remove the three screws on the backplane.
View all HP Model 748 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
VME Module Removal NOTE: If VME backplane is to be removed, all VME Cards must be removed prior to cage removal. VME Backplane Removal 1 Remove VME card cage as directed in previous steps. 2 Place the VME card cage on static mat with the EISA connector facing up. 3 Remove the three screws on the backplane. 4 Slide backplane up and away from unit. 5-33
VME Module Removal
5-33
NOTE:
If VME backplane is to be removed, all VME Cards must be
removed prior to cage removal.
VME Backplane Removal
1
Remove VME card cage as directed in previous steps.
2
Place the VME card cage on static mat with the EISA connector facing up.
3
Remove the three screws on the backplane.
4
Slide backplane up and away from unit.