HP Model 748 HP Model 748 Service Handbook - Page 79
VME Module Removal, Preliminary Requirements
View all HP Model 748 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
VME Module Removal VME Module Removal CAUTION: The EISA or PCI card cage MUST be removed before the VME cage can be removed! Preliminary Requirements 1 Shut down any applications. 2 Shut down the OS. Refer to the owner's guide for information on properly shutting down HP-UX. 3 Turn off power to the Model 748. 4 Set up a static-free work place to handle the VME card cage. 5 Disconnect power cords. 6 Remove EISA card cage. 5-31
VME Module Removal
5-31
VME Module Removal
CAUTION:
The EISA or PCI card cage
MUST
be removed before the VME
cage can be removed!
Preliminary Requirements
1
Shut down any applications.
2
Shut down the OS. Refer to the owner’s guide for information on properly shutting
down HP-UX.
3
Turn off power to the Model 748.
4
Set up a static-free work place to handle the VME card cage.
5
Disconnect power cords.
6
Remove EISA card cage.