HP Model 755/125cL hp DDS-2 tape drive user's guide (a1658-90689) - Page 16
Preparing to Install the DDS-2 Drive
View all HP Model 755/125cL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Introduction Preparing to Install the DDS-2 Drive The following information describes how to prepare the DDS-2 drive for installation. Tools Required The following tools are needed to install the DDS-2 drive: • #2 Phillips screwdriver • Small needle-nose pliers Verifying Kit Contents Verify that the kit contains one of each of the following: • DDS-2 drive (part numbers 0950-3002 for 5 1/4-in drive, or 0950-3028 for 3 1/2-in drive) • Set of 4 screws (M4x6) • Power adapter cable • SCSI I/O cable • Static strap • HP DDS-2 Tape Drive User's Guide (A1658-90689) NOTICE: If any contents of your kit are missing, contact your sales representative. Operating System Support The HP DDS-2 drive supports HP-UX 9.05 and later. This drive requires the following HP-UX patches (or their replacements): PHKL_6050 and PHSS_6142. Both patches are for OS versions 9.x only and cannot be used on any 10.x OS versions. 1-6