HP NetServer AA 6200 HP NetServer AA 6200 Solution Release Notes (Release 3.0 - Page 13

HP NetServer AA Solution Release Notes MtcCEX Message Release 3.0 Service Pack 1 introduces the following new MtcCEX message. Refer to the online manual HP NetServer AA Solution Messages for complete documentation. MtcCEX: Expected dual-processor boot, only one processor started. MtcMon Fault Handler Status Message Release 3.0 Service Pack 1 introduces the following new MtcMon Fault Handler status message. Refer to the online manual HP NetServer AA Solution Messages for complete documentation. IOPn.MtcMon Fault Handler status: The joining IOP encountered an error or operator action that caused it to shut down before it completed the joining process. MtcMon Status Messages Release 3.0 Service Pack 1 introduces the following new MtcMon status messages relating to ECC and parity memory errors. Refer to the online manual HP NetServer AA Solution Messages for complete documentation. IOPn.MtcMon status: CEx did not obtain the memory controller type. The presence of ECC or parity memory cannot be determined. IOPn.MtcMon status: CEx failed to inhibit IPMI global interrupts. IOPn.MtcMon status: CEx has provided platform device information. Chipset: vendor chipset. Memory mode: mode. IPMI found: Y/N IOPn.MtcMon status: No ECC or parity memory detected on CEx. Chipset: vendor chipset. Memory mode: mode. IPMI found: Y/N IVP Messages Release 3.0 Service Pack 1 introduces a new class of messages, the Installation and Verification Procedure (IVP) messages. The installation and verification procedure, which runs automatically on first installing HP NetServer AA Solution and at every reboot of the HP NetServer AA Solution server, evaluates the Ethernet bindings and reports any errors in those bindings to the event logs of the affected IOP. Refer to the online manual HP NetServer AA Solution Messages for complete documentation of the following new messages. Datagram Service is not bound to any adapter. 9