HP Network Scanjet 5 HP Network ScanJet 5 Scanner - Administrator's Guide - Page 18
To begin scanner configuration, To complete the scanner configuration - below
View all HP Network Scanjet 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Note Note To begin scanner configuration 1 From the JetAdmin software main window, select the scanner you want to modify. If you don't see the scanner listed, press the [F5] key to refresh (update) the window. 2 From the Device menu, choose Modify, or click the Modify icon on the toolbar. The Configuration for HP Network ScanJet 5 Scanner dialog box appears. 3 Enter information on the tabs of the Configuration dialog box. 4 Click OK to close the dialog box (or Finish if you are in Interview mode). The changes take effect. The information included in this chapter describes how to configure the scanner initially. Please refer to online Help for information regarding how to maintain the configuration. Now that you have installed the scanner software, you will need to use the HP JetAdmin software to connect the scanner to the network. To complete the scanner configuration 1 In the Configuration dialog box, click the General tab. 2 In the Description box, type a description of the scanner, such as its location or an explanation of the model. This field is optional. The description appears in the main window of the JetAdmin software. The scanner name is shown here and cannot be changed. 18 Initial Software Configuration EN