HP OMEN 15-dh1000 Maintenance and Service Guide - Page 48
Disconnect the cable from the drive, Removal and replacement procedures for Customer Self-Repair parts
View all HP OMEN 15-dh1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4. If it is necessary to disassemble the hard drive, remove the four Phillips M3.0 × 3.0 screws (1) from the bracket, and then remove the bracket from the hard drive (2). Disconnect the cable from the drive (3). Reverse this procedure to reassemble and install the hard drive. 38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
4.
If it is necessary to disassemble the hard drive, remove the four Phillips M3.0 × 3.0 screws
(1)
from the
bracket, and then remove the bracket from the hard drive
(2)
. Disconnect the cable from the drive
(3)
.
Reverse this procedure to reassemble and install the hard drive.
38
Chapter 5
Removal and replacement procedures for Customer Self-Repair parts