HP OMEN 15-dh1000 Maintenance and Service Guide - Page 64

Display assembly, from the tape that secures them to the computer chassis.

Get HP OMEN 15-dh1000 PDF manuals and user guides View all HP OMEN 15-dh1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Display assembly NOTE: The display assembly is spared only at the subcomponent level. Before removing the display assembly, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Remove the battery (see Battery on page 39). 4. Remove the fan/heat sink (see Heat sink/fan assembly on page 46). 5. Remove the system board (see System board on page 50). Remove the display assembly: 1. Remove the wireless antenna cables (1) from the tape that secures them to the computer chassis. 2. Remove the two Phillips M2.5 × 4.0 screws (2) from each hinge. 3. Open the hinges as far as possible (3). 54 Chapter 6 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Display assembly
NOTE:
The display assembly is spared only at the subcomponent level.
Before removing the display assembly, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
31
).
2.
Remove the bottom cover (see
Bottom cover
on page
32
).
3.
Remove the battery (see
Battery
on page
39
).
4.
Remove the fan/heat sink (see
Heat sink/fan assembly
on page
46
).
5.
Remove the system board (see
System board
on page
50
).
Remove the display assembly:
1.
Remove the wireless antenna cables
(1)
from the tape that secures them to the computer chassis.
2.
Remove the two Phillips M2.5 × 4.0 screws
(2)
from each hinge.
3.
Open the hinges as far as possible
(3)
.
54
Chapter 6
Removal and replacement procedures for authorized service provider parts