HP OMEN 15-dh1000 Maintenance and Service Guide - Page 63
Thermal sensor, Remove the protective tape from the board
![]() |
View all HP OMEN 15-dh1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Thermal sensor NOTE: The thermal sensor spare part kit does not include the cable. The cable is available as spare part number L57340-001. Table 6-10 Thermal sensor description and part number Description Spare part number Thermal sensor L57318-001 Before removing the thermal sensor, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Remove the battery (see Battery on page 39). 4. Remove the solid-state drive (see Solid-state drive and Optane memory module on page 34). 5. Remove the fan/heat sink (see Heat sink/fan assembly on page 46). 6. Remove the system board (see System board on page 50). Remove the thermal sensor: 1. Remove the protective tape from the board (1). 2. Remove the Phillips M2.0 × 3.0 screw (2) that secures the sensor to the computer. 3. Remove the thermal sensor from the computer (3). Reverse this procedure to install the thermal sensor. Component replacement procedures 53
![](/manual_guide/products/hewlettpackard-omen-15dh0000-maintenance-service-guide-d9e00c3/63.png)