HP OMEN 15-dh1000 Maintenance and Service Guide - Page 56
Heat sink/fan assembly, Disconnect the two fan cables from the system board
View all HP OMEN 15-dh1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Heat sink/fan assembly Table 6-6 Heat sink/fan assembly, thermal pad, and thermal grease descriptions and part numbers Description Spare part number Heat sink/fan assembly for use in models with GeForce GTX 1660 graphics L57329-001 Heat sink/fan assembly for use in models with GeForce GTX 1660Ti graphics L57330-001 Heat sink/fan assembly for use in models with GeForce GTX 2060 graphics L64443-001 Heat sink/fan assembly for use in models with GeForce GTX 2070 graphics L64444-001 Heat sink/fan assembly for use in models with GeForce GTX 2080 graphics L64445-001 Thermal grease L65268-001 Thermal pad kit L57443-001 Before removing the heat sink/fan assembly, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Remove the battery (see Battery on page 39). Remove the heat sink/fan assembly: 1. Disconnect the two fan cables from the system board (1). 2. Remove the WLAN antenna from the routing channel in the right fan (2). 3. Remove the two Phillips M2.0 × 4.0 screws (3) from each fan. 4. Remove the six Phillips M2.0 × 4.0 screws (4) in the order indicated on the heat sink. 46 Chapter 6 Removal and replacement procedures for authorized service provider parts