HP OMEN 15-dh1000 Maintenance and Service Guide - Page 52
Reverse this procedure to install the WLAN module., be installed on the antenna connector
View all HP OMEN 15-dh1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
4. Remove the WLAN module (4) by pulling the module away from the slot at an angle. NOTE: If the WLAN antenna is not connected to the terminal on the WLAN module, a protective sleeve must be installed on the antenna connector, as shown in the following illustration. Reverse this procedure to install the WLAN module. 42 Chapter 6 Removal and replacement procedures for authorized service provider parts
4.
Remove the WLAN module
(4)
by pulling the module away from the slot at an angle.
NOTE:
If the WLAN antenna is not connected to the terminal on the WLAN module, a protective sleeve must
be installed on the antenna connector, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
42
Chapter 6
Removal and replacement procedures for authorized service provider parts