HP OMEN 15-dh1000 Maintenance and Service Guide - Page 59

Card reader/USB board, Disconnect the cable from the ZIF connector on the card reader/USB board

Get HP OMEN 15-dh1000 PDF manuals and user guides View all HP OMEN 15-dh1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Card reader/USB board NOTE: The card reader/USB board spare part kit does not include the cable. The cable is available as spare part number L57338-001. Table 6-7 Card reader/USB board description and part number Description Spare part number Card reader/USB board L57317-001 Before removing the card reader/USB board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 31). 2. Remove the bottom cover (see Bottom cover on page 32). 3. Remove the battery (see Battery on page 39). 4. Remove the fan/heat sink (see Heat sink/fan assembly on page 46). Remove the card reader board: 1. Disconnect the cable from the ZIF connector on the card reader/USB board (1). 2. Remove the Phillips M2.0 × 3.5 screw (2) that secures the board to the computer. 3. Lift the side of the board up (3), and then pull the board up and into the computer to remove it (4). Reverse this procedure to install the card reader/USB board. Component replacement procedures 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Card reader/USB board
NOTE:
The card reader/USB board spare part kit does not include the cable. The cable is available as spare
part number L57338-001.
Table 6-7
Card reader/USB board description and part number
Description
Spare part number
Card reader/USB board
L57317-001
Before removing the card reader/USB board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
31
).
2.
Remove the bottom cover (see
Bottom cover
on page
32
).
3.
Remove the battery (see
Battery
on page
39
).
4.
Remove the fan/heat sink (see
Heat sink/fan assembly
on page
46
).
Remove the card reader board:
1.
Disconnect the cable from the ZIF connector on the card reader/USB board
(1)
.
2.
Remove the Phillips M2.0 × 3.5 screw
(2)
that secures the board to the computer.
3.
Lift the side of the board up
(3)
, and then pull the board up and into the computer to remove it
(4)
.
Reverse this procedure to install the card reader/USB board.
Component replacement procedures
49