HP P4000 A.05.50 HP Insight Remote Support Standard HP StorageWorks P4000 Stor - Page 9
Configuring the P4000 Storage Systems
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
The found storage systems appear in the available category in the CMC. 1.3 Configuring the P4000 Storage Systems 1.3.1 Upgrading the SAN/iQ Software on the P4000 Storage Systems You will use CMC to upgrade to SAN/iQ 8.5 on the P4000 Storage Systems. If your P4000 Storage Systems already has SAN/iQ 8.5 installed, you do not need to perform this procedure. When you upgrade the SAN/iQ software on a storage node, the version number changes. Check the current software version by selecting a storage node in the navigation window and viewing the Details tab window. See Appendix A for flowcharts that describe how to upgrade from different versions of SAN/iQ. 1.3 Configuring the P4000 Storage Systems 9
The found storage systems appear in the available category in the CMC.
1.3 Configuring the P4000 Storage Systems
1.3.1 Upgrading the SAN/iQ Software on the P4000 Storage Systems
You will use CMC to upgrade to SAN/iQ 8.5 on the P4000 Storage Systems. If your P4000 Storage Systems
already has SAN/iQ 8.5 installed, you do
not
need to perform this procedure.
When you upgrade the SAN/iQ software on a storage node, the version number changes. Check the current
software version by selecting a storage node in the navigation window and viewing the Details tab window.
See
Appendix A
for flowcharts that describe how to upgrade from different versions of SAN/iQ.
1.3 Configuring the P4000 Storage Systems
9