HP Pavilion 13-a010dx HP Pavilion x360 Convertible PC Maintenance and Service - Page 48

If it is necessary to replace the hard drive bracket, release the sides

Get HP Pavilion 13-a010dx PDF manuals and user guides View all HP Pavilion 13-a010dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 34). 5. Disconnect the battery cable from the system board (see Battery on page 38). Remove the hard drive: 1. Release the ZIF connector (1) to which the hard drive cable is attached, and then disconnect the hard drive cable from the system board. 2. Remove the two PM2.4×3.8 screws (2) that secure the hard drive to the bottom cover. 3. Remove the hard drive (3). 4. If it is necessary to replace the hard drive bracket, release the sides (1) of the bracket from the hard drive, and then lift the bracket straight up (2) and remove the bracket from the hard drive. 40 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
34
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
38
).
Remove the hard drive:
1.
Release the ZIF connector
(1)
to which the hard drive cable is attached, and then disconnect the
hard drive cable from the system board.
2.
Remove the two PM2.4×3.8 screws
(2)
that secure the hard drive to the bottom cover.
3.
Remove the hard drive
(3)
.
4.
If it is necessary to replace the hard drive bracket, release the sides
(1)
of the bracket from the
hard drive, and then lift the bracket straight up
(2)
and remove the bracket from the hard drive.
40
Chapter 5
Removal and replacement procedures