HP Pavilion 13-a010dx HP Pavilion x360 Convertible PC Maintenance and Service - Page 55
Display assembly, Remove the Phillips PM2.4×3.7 screw
View all HP Pavilion 13-a010dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Remove the power button board: 1. Release the ZIF connector (1) to which the power button board cable is attached, and then disconnect the power button board cable from the system board. 2. Remove the Phillips PM2.4×3.7 screw (2) that secures the power button board to the bottom cover. 3. Remove the power button board (3) and cable. Reverse this procedure to install the power button board. Display assembly NOTE: The display assembly is spared at the subcomponent level only. For display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 34). 5. Disconnect the battery cable from the system board (see Battery on page 38). Display assembly 47