HP Pavilion 13-a010dx HP Pavilion x360 Convertible PC Maintenance and Service - Page 51

Audio/USB board

Get HP Pavilion 13-a010dx PDF manuals and user guides View all HP Pavilion 13-a010dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Reverse this procedure to install the WLAN module. Audio/USB board Description Audio/USB board (includes audio jack, cable, and USB port) Spare part number 768011-001 Before removing the audio/USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 34). 5. Disconnect the battery cable from the system board (see Battery on page 38). Remove the audio/USB board: 1. Release the ZIF connector (1) to which the audio/USB board cable is attached, and then disconnect the audio/USB board cable from the system board. 2. Detach the audio/USB board cable (2) from the battery. (The audio/USB board cable is attached to the battery with double-sided adhesive.) 3. Disconnect the speaker cable (3) from the audio/USB board. 4. Remove the Phillips PM2.4×3.7 screw (4) that secures the audio/USB board to the bottom cover. 5. Lift the right edge of the audio/USB board (5) and swing it up until it rests at an angle. Audio/USB board 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Reverse this procedure to install the WLAN module.
Audio/USB board
Description
Spare part number
Audio/USB board (includes audio jack, cable, and USB port)
768011-001
Before removing the audio/USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
34
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
38
).
Remove the audio/USB board:
1.
Release the ZIF connector
(1)
to which the audio/USB board cable is attached, and then
disconnect the audio/USB board cable from the system board.
2.
Detach the audio/USB board cable
(2)
from the battery. (The audio/USB board cable is attached
to the battery with double-sided adhesive.)
3.
Disconnect the speaker cable
(3)
from the audio/USB board.
4.
Remove the Phillips PM2.4×3.7 screw
(4)
that secures the audio/USB board to the bottom cover.
5.
Lift the right edge of the audio/USB board
(5)
and swing it up until it rests at an angle.
Audio/USB board
43