HP Pavilion 15-cc600 Maintenance and Service Guide 1 - Page 48
Hard drive, Release the zero insertion force ZIF connector
View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket or the hard drive cable. The hard drive bracket is available using spare part number 933608-001. The hard drive cable is available using spare part number 928944-001. Description 2-TB, 5400-rpm, SATA, 7.2-mm hard drive 1-TB, 5400-rpm, SATA, 7.0-mm, Hybrid 8.0-GB hard drive 1-TB, 5400-rpm, SATA, 7.2-mm hard drive 500-GB, 5400-rpm, SATA, 7.0-mm hard drive Spare part number 912487-855 924036-005 762990-005 778185-005 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 37). 5. Remove the battery (see Battery on page 39). Remove the hard drive: 1. Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then disconnect the hard drive cable from the system board. 2. Lift the right side of the hard drive (2) to release it from the hard drive bay, and then remove the hard drive. 40 Chapter 5 Removal and replacement procedures