HP Pavilion 15-cc600 Maintenance and Service Guide 1 - Page 54

TouchPad cable, Release the ZIF connector

Get HP Pavilion 15-cc600 PDF manuals and user guides View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

TouchPad cable NOTE: The TouchPad cable is included in the TouchPad spare part kit, spare part number L01118-001. Before removing the TouchPad cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 37). 5. Remove the battery (see Battery on page 39). Remove the TouchPad cable: 1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Release the ZIF connector (2) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the TouchPad. 3. Remove the TouchPad cable (3). Reverse this procedure to install the TouchPad cable. 46 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
TouchPad cable
NOTE:
The TouchPad cable is included in the TouchPad spare part kit, spare part number L01118-001.
Before removing the TouchPad cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
37
).
5.
Remove the battery (see
Battery
on page
39
).
Remove the TouchPad cable:
1.
Release the ZIF connector
(1)
to which TouchPad cable is connected, and then disconnect
the TouchPad cable from the system board.
2.
Release the ZIF connector
(2)
to which TouchPad cable is connected, and then disconnect
the TouchPad cable from the TouchPad.
3.
Remove the TouchPad cable
(3)
.
Reverse this procedure to install the TouchPad cable.
46
Chapter 5
Removal and replacement procedures