HP Pavilion 15-cc600 Maintenance and Service Guide 1 - Page 67

USB port board cable, Remove the USB port board cable

Get HP Pavilion 15-cc600 PDF manuals and user guides View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

USB port board cable NOTE: The USB port board spare part kit does not include the USB port board cable. The USB port board cable is available using spare part number 928941-001. Before removing the USB port board cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 37), and then remove the following components: a. Battery (see Battery on page 39) b. Fan (see Fan on page 50) c. System board (see System board on page 52) Remove the USB port board cable: 1. Turn the system board upside down with the front toward you. 2. Release the ZIF connector (1) to which USB port board cable is connected, and then disconnect the USB port board cable (2) from the audio jack board. 3. Remove the USB port board cable. Reverse this procedure to install the USB port board cable. Component replacement procedures 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
USB port board cable
NOTE:
The USB port board spare part kit does not include the USB port board cable. The USB port
board cable is available using spare part number 928941-001.
Before removing the USB port board cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
37
), and then remove the following components:
a.
Battery (see
Battery
on page
39
)
b.
Fan (see
Fan
on page
50
)
c.
System board (see
System board
on page
52
)
Remove the USB port board cable:
1.
Turn the system board upside down with the front toward you.
2.
Release the ZIF connector
(1)
to which USB port board cable is connected, and then disconnect the USB
port board cable
(2)
from the audio jack board.
3.
Remove the USB port board cable.
Reverse this procedure to install the USB port board cable.
Component replacement procedures
59