HP Pavilion 15-cc600 Maintenance and Service Guide 1 - Page 62
Remove the system board, Display panel ZIF connector cable
View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Description Equipped with an Intel Pentium 4415U 2.30-GHz dual core processor (2133-MHz FSB, 2.0-MB L3 cache, 15-W), an Intel HD Graphics 610 graphics subsystem with UMA video memory, and the Windows 10 operating system Equipped with an Intel Pentium 4415U 2.30-GHz dual core processor (2133-MHz FSB, 2.0-MB L3 cache, 15-W), an Intel HD Graphics 610 graphics subsystem with UMA video memory, and a non-Windows operating system Spare part number 927267-601 927267-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 37). 5. Remove the battery (see Battery on page 39). 6. Remove the fan (see Fan on page 50). When replacing the system board, be sure to remove the following components from the defective system board and install them on the replacement system board: ● Memory module (see Memory module on page 41) ● Solid-state drive (see Solid-state drive on page 43) ● WLAN module (see WLAN module on page 44) ● Heat sink (see Heat sink on page 56) ● USB port board cable (see USB port board cable on page 59) Remove the system board: 1. Disconnect the following cables from the system board: (1) Display panel ZIF connector cable (2) Power connector cable (3) Power button board ZIF connector cable (4) USB port board ZIF connector cable (5) WLAN antenna cables NOTE: The #1/white WLAN antenna cable connects to the WLAN module "#1/Main" terminal. The #2/ black WLAN antenna cable connects to the WLAN module "#2/Aux" terminal. (6) Speaker cable (7) TouchPad ZIF connector cable (8) Keyboard ZIF connector cable (9) Backlight ZIF connector cable 54 Chapter 5 Removal and replacement procedures