HP Pavilion 15-cc600 Maintenance and Service Guide 1 - Page 56

Power connector cable, Reverse this procedure to install the TouchPad.

Get HP Pavilion 15-cc600 PDF manuals and user guides View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Reverse this procedure to install the TouchPad. Power connector cable Description Power connector cable Spare part number 808155-026 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 37). 5. Remove the Battery (see Battery on page 39). Remove the power connector cable: 1. Remove the three Phillips PM2.5×5.8 screws (1) that secure the right display hinge and power connector cable to the keyboard/top cover. 2. Swing the right display hinge (2) up and back. 3. Disconnect the power connector cable (1) from the system board. 48 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Reverse this procedure to install the TouchPad.
Power connector cable
Description
Spare part number
Power connector cable
808155-026
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
37
).
5.
Remove the Battery (see
Battery
on page
39
).
Remove the power connector cable:
1.
Remove the three Phillips PM2.5×5.8 screws
(1)
that secure the right display hinge and power connector
cable to the keyboard/top cover.
2.
Swing the right display hinge
(2)
up and back.
3.
Disconnect the power connector cable
(1)
from the system board.
48
Chapter 5
Removal and replacement procedures