HP Pavilion 15-cc600 Maintenance and Service Guide 1 - Page 63
Phillips PM2.0×5.8 screws, and the two Phillips PM2.0×3.0 screws
View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
(10) Hard drive ZIF connector cable 2. Detach the USB port board cable (9) from the keyboard/top cover. (The USB port board cable is attached to the keyboard/top cover with double-sided adhesive.) 3. Remove the five Phillips PM2.0×5.8 screws (1) and the two Phillips PM2.0×3.0 screws (2) that secure the system board to the keyboard/top cover. 4. Swing the display left hinge (3) up and back. 5. Lift the right side of the system board (1) until it rests at an angle. Component replacement procedures 55
(10)
Hard drive ZIF connector cable
2.
Detach the USB port board cable
(9)
from the keyboard/top cover. (The USB port board cable is attached
to the keyboard/top cover with double-sided adhesive.)
3.
Remove the
five
Phillips PM2.0×5.8 screws
(1)
and the two Phillips PM2.0×3.0 screws
(2)
that secure
the system board to the keyboard/top cover.
4.
Swing the display left hinge
(3)
up and back.
5.
Lift the right side of the system board
(1)
until it rests at an angle.
Component replacement procedures
55