HP Pavilion 17-f200 Pavilion 17 Notebook PC Pavilion 15 Notebook PC Maintenanc - Page 72
WLAN module, Remove the Phillips PM screws
View all HP Pavilion 17-f200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
WLAN module Description Spare part number Realtek RT8188EE 802.11 bgn 1x1 Wi-Fi adapter, for use only on computer models equipped with Intel 709848-005 processors for HP Pavilion 17 and 15 Notebook PC computer models Broadcom BCM43142 802.11 bgn 1x1 Wi-Fi + BT4.0 HMC combo adapter, for use only on computer models equipped with Intel processors for HP Pavilion 17 and 15 Notebook PC computer models available for Windows 10 753076-005 Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 combo adapter, for use only on computer 710662-005 models equipped with Intel processors for HP Pavilion 17 and 15 Notebook PC computer models Realtek RT8723BE 802.11bgn 1x1 Wi-Fi + BT4.0 Combo Adapter for HP Pavilion 17 Notebook PC computer models available for Windows 10 753077-005 RTL8188EE 802.11BGN 1x1 available for Windows 10 709848-005 Broadcom BCM 4352 WLAN 802.11 AC+BT4 2x2 HMC for HP Pavilion 15 AMD computer models available 724935-005 for Windows 10 Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter for HP Pavilion 17 and 15 784638-005 Notebook PC CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42). 5. Remove the optical drive. 6. Remove the base enclosure and top cover (see Base enclosure on page 46). Remove the WLAN module: 1. Disconnect the #1 and #2 WLAN antenna cables from the WLAN module (1) if you have not already done so to remove the display panel. NOTE: The WLAN module may have two screws depending on the model. NOTE: The #1 WLAN antenna cable is connected to the WLAN module #1 main terminal. The #2 WLAN antenna cable is connected to the WLAN module #2 auxiliary terminal. 2. Remove the Phillips PM screw(s) (2) that secure the WLAN module to the system board. (The WLAN module tilts up.) 62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts