HP Pavilion 17-f200 Pavilion 17 Notebook PC Pavilion 15 Notebook PC Maintenanc - Page 94
Fan, Disconnect the power from the computer by first unplugging the power cord from the AC outlet
View all HP Pavilion 17-f200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
1. Release the metal clip to disconnect the power connector cable (1) from the system board. 2. Disengage the cable from the clips (2). 3. Release the clips (3), and then remove the power connector cable (4). Fan Reverse this procedure to install the power connector cable and bracket. Description For use with HP Pavilion 15 Notebook PC computer models For use with HP Pavilion 17 Notebook PC computer models Spare part number 762505-001 765788-001 Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 42), 5. Remove the optical drive. 6. Remove the top cover from the base enclosure (see Base enclosure on page 46). 7. Remove the WLAN module (see WLAN module on page 62). 8. Remove the system board (see System board on page 70). 84 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts