HP Pavilion 8300 HP Pavilion PC Models 8370 and 8380 - Getting Help Manual - Page 47
Installing a DIMM
View all HP Pavilion 8300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
All installed memory modules must be 168-pin unbuffered SDRAM (synchronous dynamic random access memory) DIMMs, and compliant with the Intel "PC SDRAM Unbuffered DIMM Specification Revision 1.0." This specification covers both 66-MHz and 100-MHz SDRAM DIMMs. Refer to your HP Pavilion PC technical specifications on the HP online System Guide to determine whether 66-MHz or 100-MHz memory is required. HP Pavilion PCs with two DIMM sockets can support up to 256 MB of SDRAM, and HP Pavilion PCs with three DIMM sockets can support up to 384 MB of SDRAM. Your HP Pavilion PC is shipped with one or more DIMMs, but you can replace the existing DIMM(s) with higher capacity ones. Installing a DIMM To install a DIMM: 1 Turn off the computer and all peripherals. 2 Disconnect the modem cable. 3 Disconnect the power cord. 4 Remove the back panel (see "Removing the Back Panel" on page 37.) 5 Remove the right side panel (see "Removing the Right Side Panel" on page 38). 6 Lay the computer gently on the left side panel. 7 Move any cabling out of the way, if necessary. 8 Push down on the two retaining clips on the ends of the DIMM socket. Chapter 3 • Upgrading and Servicing Your Computer 43