HP Pavilion dm1-2000 HP Notebook PC User Guide - Windows 7 - Page 55
Using HP ProtectSmart Hard Drive Protection software, Replacing the hard drive in the hard drive bay
View all HP Pavilion dm1-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Using HP ProtectSmart Hard Drive Protection software The HP ProtectSmart Hard Drive Protection software: ● Enables and disables HP ProtectSmart Hard Drive Protection. NOTE: Depending on your user privileges, you might not have the rights to enable or disable HP ProtectSmart Hard Drive Protection. Additionally, members of an Administrator group can change the privileges for non-Administrator users. ● Determines whether a drive in the system is supported. To open the software and change settings: 1. In Mobility Center, click the Hard Drive icon to open the HP ProtectSmart Hard Drive Protection window. - or - Select Start > Control Panel > Hardware and Sound > HP ProtectSmart Hard Drive Protection. NOTE: If prompted by User Account Control, click Yes. 2. Click the appropriate button to change the settings. 3. Click OK. Replacing the hard drive in the hard drive bay CAUTION: To prevent information loss or an unresponsive system: Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the hard drive while the computer is on, in the Sleep state, or in Hibernation. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. To remove the hard drive: 1. Save your work. 2. Shut down the computer and close the display. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. With the hard drive bay toward you, loosen the hard drive cover screws (1) using a small Phillips screwdriver. Drives 45