HP Pavilion dv6-1200 HP Pavilion dv6 Entertainment PC - Maintenance and Servic - Page 89
Remove the Phillips PM2.5×4.0 screw, Fingerprint reader board cable
View all HP Pavilion dv6-1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
3. Remove the Phillips PM2.5×4.0 screw (2) that secures the top cover to the computer. This screw is in the battery bay. 4. Turn the computer right-side up, with the front toward you. 5. Disconnect the following cables from the system board: (1) TouchPad cable (2) Fingerprint reader board cable NOTE: This cable connects to a LIF connector on the system board. Component replacement procedures 81
3.
Remove the Phillips PM2.5×4.0 screw
(2)
that secures the top cover to the computer. This screw
is in the battery bay.
4.
Turn the computer right-side up, with the front toward you.
5.
Disconnect the following cables from the system board:
(1)
TouchPad cable
(2)
Fingerprint reader board cable
NOTE:
This cable connects to a LIF connector on the system board.
Component replacement procedures
81