HP Photosmart 420 User Guide - Page 25
Remove the Pink Tape, Do Not Touch Here, Prepare the printer and cartridge, Insert the cartridge - ink cartridges
View all HP Photosmart 420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 2 Remove the Pink Tape: Do Not Touch Here Prepare the printer and cartridge: 1. Make sure the power is on and you have removed the cardboard from inside the printer. 2. Open the print cartridge access door of the printer. 3. Remove the bright pink tape from the cartridge. Insert the cartridge: 1. If you are replacing a cartridge, push down and pull outward on the cartridge in the cradle to remove it. 2. Hold the replacement cartridge with the label on top. Slide the cartridge at a slight upward angle into the cradle so the copper-colored contacts go in first. Push the cartridge until it snaps into place. 3. Close the print cartridge access door. The camera Image Display shows an icon with the approximate ink level for the installed cartridge (100-66%, 65-33%, or 32-0%). No ink-level icon appears if the cartridge is not a genuine HP cartridge. Each time you install or replace a print cartridge, a message appears on the camera Image Display asking you to load plain paper so the printer can align the cartridge. This ensures high-quality prints. 20 HP Photosmart 420 series GoGo Photo Studio