HP Photosmart 715 HP Photosmart 715 Digital Camera - User Guide - Page 58

Problem, Possible cause, Solution

Page 58 highlights

Problem Possible cause Solution The camera does not turn on. (continued) The AC adapter is not functioning correctly. Check the following conditions: • The AC power adapter is plugged into an electrical outlet • There is power at the outlet. • The AC power adapter is not damaged. • Make sure you are using the correct HP-approved AC adapter. You have an AC power adapter connected to the camera, but it is not connected to a power source. When you have an AC adapter connected to the camera, the camera does not use battery power even if the adapter is not connected to a power source. If you want to use battery power, disconnect the AC adapter from the camera. If you want to use AC power, connect the AC adapter to a working electrical outlet. The camera does not respond when I press a button. The camera is off. The camera is connected to a computer. Slide the switch to turn on the camera (if you want to take a picture) or turn on the image display (if you want to review your images). If the status LCD displays the letters PC, the camera buttons do not respond. The batteries are empty. Replace the batteries. The camera needs to be reset. Turn the camera off and then on again. Remove the batteries and reinstall them. If you are using an AC power adapter, disconnect the adapter from the camera, remove and reinstall the batteries, and then reconnect the adapter. 50 HP photosmart 715 user guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

HP photosmart 715 user guide
50
The camera
does not turn
on.
(continued)
The AC adapter is
not functioning
correctly.
Check the following conditions:
The AC power adapter is plugged
into an electrical outlet
There is power at the outlet.
The AC power adapter is not
damaged.
Make sure you are using the correct
HP-approved AC adapter.
You have an AC
power adapter
connected to the
camera, but it is not
connected to a
power source.
When you have an AC adapter
connected to the camera, the camera
does not use battery power even if the
adapter is not connected to a power
source. If you want to use battery power,
disconnect the AC adapter from the
camera. If you want to use AC power,
connect the AC adapter to a working
electrical outlet.
The camera
does not
respond when
I press a
button.
The camera is off.
Slide the
switch to turn on
the camera (if you want to take a picture)
or turn on the image display (if you want
to review your images).
The camera is
connected to a
computer.
If the status LCD displays the letters
PC
, the camera buttons do not respond.
The batteries are
empty.
Replace the batteries.
The camera needs
to be reset.
Turn the camera off and then on again.
Remove the batteries and reinstall them.
If you are using an AC power adapter,
disconnect the adapter from the camera,
remove and reinstall the batteries, and
then reconnect the adapter.
Problem
Possible cause
Solution