HP Photosmart 715 HP Photosmart 715 Digital Camera - User Guide - Page 60

Problem The incorrect language is set on the camera. Possible cause Solution The wrong language was selected when you started the camera the first time. Change the camera language by using the camera's Setup menu. 1 After opening the Setup menu, use the down side of the controller to scroll to the last menu option. 2 Press the right or left side of the controller until the desired language appears, and then press OK. A long delay occurs after I press the shutter button and before the camera takes a picture. The camera is still saving the last picture you took. The light is low and the flash is turned off. Wait a few seconds for the camera to finish processing the image, and then press the SHUTTER button halfway down. When a steady green light appears next to the viewfinder, the camera is ready to take another picture. In dim light the camera requires a longer exposure. Keep the camera very steady by placing it on a tripod until it takes the picture; or improve the lighting conditions or use the flash. A red light appears next to the viewfinder when I press the SHUTTER button. The camera is still saving the last picture you took. Wait a few seconds for the camera to finish processing the image, and then press the SHUTTER button halfway down. When a steady green light appears next to the viewfinder, the camera is ready to take another picture. The CF memory card has insufficient space for the picture. (The status LCD shows 000 pictures remaining.) Install a new CF memory card, make room on the current card by deleting or unloading photos, or select a lower image quality setting. The CF memory card that you have in the camera is damaged or is not formatted. Format the CF memory card or replace it with a new, formatted card. The flash is recharging. Wait until the flash icon on the status LCD stops blinking before taking another flash picture. 52 HP photosmart 715 user guide