HP Presario 1600 Presario Select 1200 and 1600 Series Maintenance and Service - Page 34
Service Considerations, Tool and Software Requirements, Screws - drivers
View all HP Presario 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Maintenance & Service Guide Presario Series Models : 1270, 1670, and 1675 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Service Considerations Listed below are some of the considerations that you should keep in mind during the disassembly and assembly of the computer. Tool and Software Requirements To service the computer, you need the following: q Compaq screwdriver kit (Spare Part No. 161946-001) q Torx T-9 screwdriver q 3/16-inch and 5mm nut drivers (for screwlocks and standoffs) q Small, standard screwdriver q Small, Phillips screwdriver q Diagnostics software Screws The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations. IMPORTANT: As each subassembly is removed from the computer, it should be placed away from the work area to prevent damage. Return to Removal & Replacement Procedures