HP Presario C700 HP G7000 Notebook PC and Compaq Presario C700 Notebook PC - M - Page 49
Hard drive, Lift the left side of the hard drive bay cover
View all HP Presario C700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Hard drive NOTE: All hard drive spare part kits include a hard drive bracket. Description 160-GB, 5400-rpm 120-GB, 5400-rpm 80-GB, 5400-rpm Spare part number 454925-001 454924-001 454923-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive bay cover to the computer. 3. Lift the left side of the hard drive bay cover (2), swing it up and to the right, and remove the cover. The hard drive bay cover is included in the Plastics Kit, spare part number 454937-001. 4. Use the Mylar tab (1) to slide the hard drive (2) to the left until it disconnects from the system board. Component replacement procedures 41