HP ProBook 4340s HP ProBook 4340s Notebook PC HP ProBook 4341s Notebook PC - M - Page 60
Fingerprint reader board, Remove the Phillips PM2.0×3.0 screw
View all HP ProBook 4340s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Fingerprint reader board NOTE: All fingerprint reader assembly spare part kits include cable, bracket, and screws) Description Fingerprint reader board (includes cable, bracket, and screws)) Spare part number 683862-001 Before removing the fingerprint reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 31). 5. Remove the following components: a. Bottom door (see Bottom door on page 33). b. Keyboard (see Keyboard on page 45) c. Top cover (see Top cover on page 47) Remove the fingerprint reader board: 1. Position the top cover upside-down. 2. Remove the Phillips PM2.0×3.0 screw (1) that secures the fingerprint reader board bracket to the top cover. 3. Slide the bracket toward the edge of the top cover (2), and then lift it off the top cover (3). 52 Chapter 4 Removal and replacement procedures