HP ProBook 4340s HP ProBook 4340s Notebook PC HP ProBook 4341s Notebook PC - M - Page 78
Remove the three Torx T8M2.5×6.0 screws, that secure the display to the computer.
View all HP ProBook 4340s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
3. Pull the antennas through the hole that leads to the top of the computer (2). 4. Open the computer as far as possible. 5. Disconnect the display cable (1) from the system board and make sure the antenna cables are all pulled through the hole (2) that routes to the bottom of the computer. 6. Remove the three Torx T8M2.5×6.0 screws (1) that secure the display to the computer. 70 Chapter 4 Removal and replacement procedures
3.
Pull the antennas through the hole that leads to the top of the computer
(2)
.
4.
Open the computer as far as possible.
5.
Disconnect the display cable
(1)
from the system board and make sure the antenna cables are
all pulled through the hole
(2)
that routes to the bottom of the computer.
6.
Remove the three Torx T8M2.5×6.0 screws
(1)
that secure the display to the computer.
70
Chapter 4
Removal and replacement procedures