HP ProBook 4340s HP ProBook 4340s Notebook PC HP ProBook 4341s Notebook PC - M - Page 67
Speaker assembly, Disconnect the speaker cable from the system board
View all HP ProBook 4340s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Speaker assembly Description Speaker assembly Spare part number 684242-001 Before removing the speaker assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 31). 5. Remove the following components: a. Bottom door (see Bottom door on page 33). b. Keyboard (see Keyboard on page 45) c. Top cover (see Top cover on page 47) Remove the speaker assembly: 1. Position the computer upright with the front toward you. 2. Disconnect the speaker cable from the system board (1). 3. Remove the four Torx T8M2.5×6.0 screws (2) that secure the speaker assembly to the computer. 4. Remove the tape (3) that secures the speaker cables to the computer. Component replacement procedures 59