HP ProBook 4340s HP ProBook 4340s Notebook PC HP ProBook 4341s Notebook PC - M - Page 75
Top cover see, Heat sink see
View all HP ProBook 4340s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Description B970, 2.3-GHz, with 2-MB L3 cache Intel Celeron processor B840, 1.9-GHz, with 2-MB L3 cache Spare part number 676785-001 664663-001 Before removing the processor, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 31). 5. Remove the following components: a. Bottom door (see Bottom door on page 33) b. Hard drive (see Hard drive on page 37) c. Optical drive (see Optical drive on page 35) d. WLAN module (see WLAN/Bluetooth combo card on page 43) e. WWAN module (see WWAN module on page 41) f. Keyboard (see Keyboard on page 45) g. Top cover (see Top cover on page 47) h. System board (see System board on page 61) i. Heat sink (see Heat sink on page 63) Remove the processor: 1. Position the system board upside-down. 2. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise until you hear a click. Component replacement procedures 67