HP ProLiant BL420c HP ProLiant BL420c Gen8 Server Blade User Guide - Page 44

Retaining the recovery key/password, Power up the server blade

Get HP ProLiant BL420c PDF manuals and user guides View all HP ProLiant BL420c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

10. Install the TPM board. Press down on the connector to seat the board ("System board components" on page 8). 11. Install the TPM security rivet by pressing the rivet firmly into the system board. 12. Install the front panel/drive cage assembly. 13. Install the DIMM baffle. 14. Install the SAS controller (on page 15). 15. Install the access panel (on page 14). 16. Install the server blade ("Installing a server blade" on page 21). 17. Power up the server blade (on page 12). Retaining the recovery key/password The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system integrity. Hardware options installation 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Hardware options installation 44
10.
Install the TPM board. Press down on the connector to seat the board ("
System board components
" on
page
8
).
11.
Install the TPM security rivet by pressing the rivet firmly into the system board.
12.
Install the front panel/drive cage assembly.
13.
Install the DIMM baffle.
14.
Install the SAS controller (on page
15
).
15.
Install the access panel (on page
14
).
16.
Install the server blade ("
Installing a server blade
" on page
21
).
17.
Power up the server blade (on page
12
).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system
integrity.