HP ProLiant BL490c HP ProLiant BL490c G6 Server Blade User Guide - Page 36
Retaining the recovery key/password
View all HP ProLiant BL490c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
CAUTION: Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider the system compromised and take appropriate measures to ensure the integrity of the system data. 5. Install the TPM board. Press down on the connector to seat the board ("System board components" on page 7). 6. Install the TPM security rivet by pressing the rivet firmly into the system board. 7. Install the access panel (on page 13). 8. Install the server blade ("Installing a server blade" on page 17). 9. Power up the server blade (on page 11). Retaining the recovery key/password The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery Hardware options installation 36