HP ProLiant ML10 HP ProLiant ML10 Server User Guide - Page 15
Press the Power On/Standby button., CAUTION, IMPORTANT
 |
View all HP ProLiant ML10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server in this manner results in improper airflow and improper cooling that can lead to thermal damage. 1. Place the access panel on the chassis, and then slide it toward the front of the server. 2. Tighten the T-15 screw. 3. Connect each power cord to the server. 4. Connect each power cord to the power source. IMPORTANT: Be sure that the panel is locked into place securely before powering up the server. 5. Press the Power On/Standby button. The server exits standby mode and applies full power to the system. The system power LED changes from amber to green. Operations 15
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
 |
 |
Operations 15
CAUTION:
Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
1.
Place the access panel on the chassis, and then slide it toward the front of the server.
2.
Tighten the T-15 screw.
3.
Connect each power cord to the server.
4.
Connect each power cord to the power source.
IMPORTANT:
Be sure that the panel is locked into place securely before powering up the server.
5.
Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.