HP ProLiant ML10 HP ProLiant ML10 Server User Guide - Page 39
Install the DIMM., Connect the power cord to the server.
View all HP ProLiant ML10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
4. Place the server on the side. 5. Remove the access panel (on page 12). 6. Open the DIMM slot latches. 7. Install the DIMM. 8. Install the access panel (on page 14). 9. Return the server to an upright position. 10. Connect the power cord to the server. 11. Connect the power cord to the power source. 12. Press the Power On/Standby button. The server exits standby mode and applies full power to the system. The system power LED changes from amber to green. Hardware options installation 39
Hardware options installation 39
4.
Place the server on the side.
5.
Remove the access panel (on page
12
).
6.
Open the DIMM slot latches.
7.
Install the DIMM.
8.
Install the access panel (on page
14
).
9.
Return the server to an upright position.
10.
Connect the power cord to the server.
11.
Connect the power cord to the power source.
12.
Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.