HP ProLiant ML10 HP ProLiant ML10 Server User Guide - Page 25
Unfasten and remove the four T-15 screws connected to the drive cage.
View all HP ProLiant ML10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
b. Pull the cables out. 9. Remove the drive: a. Unfasten and remove the four T-15 screws connected to the drive cage. b. Slide out the drive to remove it. 10. Disconnect the 24 pin power supply cable: a. Release the cable tie securing the 24 pin power supply cable. Hardware options installation 25
Hardware options installation 25
b.
Pull the cables out.
9.
Remove the drive:
a.
Unfasten and remove the four T-15 screws connected to the drive cage.
b.
Slide out the drive to remove it.
10.
Disconnect the 24 pin power supply cable:
a.
Release the cable tie securing the 24 pin power supply cable.