HP ProLiant SL2500 HP Scripting Toolkit 9.60 for Windows User Guide - Page 42

Error code Error message Comment or clarification 516 Internal error. An error occurred during the configuration process, but HP SSA cannot identify the error because there is an internal HP SSA error. 1052 Array requires an odd number of drives. This error message occurs if you attempt to add an odd number of drives to an array that has RAID 1 logical drives, and the controller does not support RAID-level migration. 1053 Cannot remove physical drives from existing array. This error message occurs if a script that is running in Reconfigure action mode lists fewer physical drives than already exist in the array. HP SSA interprets this script as a request to remove physical drives from an existing array, but satisfying this request causes data loss, so HP SSA prevents the script from running. 1065-1066 Too many coinciding expansion, migration, or extension operations. HP SSA does not support multiple simultaneous expansions, migrations, or extensions without saving the configuration between operations. Limit the number of such configuration changes in the script. 1091 Controller does not support SSP. - 1093 Controller requires physical drives to set - license keys. 1102 Slot information is not available. You cannot run a script in Input mode on internal controllers that do not have slot information online. Systems running Microsoft Windows must have the System Management Driver loaded. 1110 Controller does not support license keys. - 1111 Invalid license key. - 1112 Controller has maximum number of license - keys. 1114 Controller requires non-failed physical - drives to set license keys. 2564 Controller is locked by another machine or - user. 2818 Invalid Method. The scripted Method value is not valid. 2819 Invalid Controller. The scripted controller does not match any existing controllers. 2820 Could not detect controller . - 2821 No controllers detected. This error applies to Input mode only. If no controllers are detected in Capture mode, the capture file is empty. 2822 Invalid read cache/write cache ratio. The specified cache ratio is not supported by either the controller or the current controller configuration. 2823 Invalid rebuild priority. - 2824 Invalid expand priority. This error message appears if the expand priority value specified in the script is not supported. This message also appears if expansion is not possible because the Expand Priority feature is then not supported. Expansion might be temporarily unavailable on a controller that normally supports expansion if, for example, the cache battery has low charge, another expansion or migration is already in progress, or the array has the maximum supported number of physical drives. 2825 Invalid array. The array ID is invalid. 42 Scripting Toolkit utilities