Home » HP Manuals » Servers » HP ProLiant SL2500 » Manual Viewer

HP ProLiant SL2500 HP Scripting Toolkit 9.60 for Windows User Guide - Page 50

HPQLAREP command-line examples, Using HPONCFG, HPONCFG command-line syntax

Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

HPQLAREP command-line examples hpqlarep -s hba.ini generates hba.ini with the following content: [HBA0] WWID=11111111 HostAdapterBiosEnable=1 SelectBootEnable=1 BootDeviceWWID= BootDeviceLUN[0]= You must edit hba.ini and add the following boot device information: [HBA0] WWID=11111111 HostAdapterBiosEnable=1 SelectBootEnable=1 BootDeviceWWID=22222222 BootDeviceLUN[0]=3 You must then invoke the tool to load the contents of hba.ini input to the HBA NVRAM: hpqlarep -l hba.ini. Using HPONCFG HP offers support for the iLO features available on HP ProLiant servers with the HPONCFG utility. HPONCFG is an online configuration tool used to set up and reconfigure iLO without requiring a reboot of the server operating system. The utility runs in a command-line mode and must be executed from an operating system command line. HPONCFG enables you to initially configure features exposed through the RBSU or iLO. This utility is not intended for continued administration. CPQLOCFG should be used for ongoing administration of user rights and network functionality on the server. Before using HPONCFG, the iLO Management Interface Driver must be loaded on the server. HPONCFG displays a warning if the driver is not installed. For more information, see the HP iLO website at http://www.hp.com/go/ilo. Also, see the HP iLO 4 Scripting and Command Line Guide (for Gen8 servers) on the HP website at http://www.hp.com/go/proliantgen8/docs or the HP ProLiant Integrated Lights-Out 3 v1.20 Scripting and Command Line Guide (for G7 servers) on the HP website at www.hp.com/go/ilo. HPONCFG command-line syntax hponcfg [-help][/?][-reset][-f filename][-l filename] [-w filename][-get_hostinfo][-m firmwarelevel] IMPORTANT: Because the -w argument does not capture certain types of information, such as the administrator password, data files created with HPONCFG using the -w argument cannot then be used as input files for HPONCFG, unless they are modified first. HPONCFG command-line arguments Command-line argument /help or /h -reset Description These arguments display simple help messages. This argument resets the iLO to factory defaults. 50 Scripting Toolkit utilities

Section	Page
HP Scripting Toolkit for Windows 9.60 User Guide	1
Contents	3
1 Introduction	6
Scripting Toolkit for Windows	6
Microsoft Windows Preinstallation Environment	6
Minimum requirements	6
2 Deployment using the Scripting Toolkit for Windows	7
Deployment overview	7
Sample deployment procedure	7
Creating a network share	8
Adding drivers to Windows PE 3.0	8
Adding drivers to Windows PE 4.0	9
Capturing a reference configuration from the source server	10
Configuring the target server and installing the operating system	11
3 Advanced topics	12
Overview	12
Customizing deployment scripts using HPDISCOVERY and IFHW	12
Querying the HPDISCOVERY file based on system name	12
Querying the HPDISCOVERY file to determine the presence of a particular card	12
Querying the HPDISCOVERY file to determine the presence of a card family	13
Booting Windows PE from a USB drive key	13
Flashing the ROM in a Windows PE environment	13
Erasing array configurations	15
4 Scripting Toolkit utilities	16
Syntax conventions	16
Utility online help	16
Using Scripting Toolkit utilities	16
Using REBOOT	17
REBOOT command-line syntax	17
REBOOT command-line arguments	17
REBOOT return codes	17
REBOOT command-line examples	18
Using SETBOOTORDER	18
SETBOOTORDER command-line syntax	18
SETBOOTORDER command-line arguments	18
SETBOOTORDER return codes	18
SETBOOTORDER command-line examples	18
Using STATEMGR	19
STATEMGR command-line syntax	19
STATEMGR command-line arguments	19
STATEMGR return codes	19
STATEMGR command-line examples	19
Using RBSURESET	19
RBSURESET command-line syntax	20
RBSURESET command-line arguments	20
RBSURESET return codes	20
Using HPDISCOVERY	20
HPDISCOVERY command-line syntax	20
HPDISCOVERY command line arguments	20
HPDISCOVERY return codes	21
HPDISCOVERY command line examples	21
Using IFHW	21
IFHW command-line syntax	21
IFHW command-line arguments	22
IFHW return codes	22
IFHW command line examples	22
Expression operators and terms	22
Expression examples	23
Using HWQUERY	23
HWQUERY command-line syntax	23
HWQUERY command line arguments	23
HWQUERY return codes	24
HWQUERY command-line examples	24
Using CONREP	24
CONREP command-line syntax	25
CONREP command-line arguments	25
CONREP return codes	25
CONREP screen output	26
CONREP -s (Store to Data file)	26
CONREP –l (Load from Data File)	26
CONREP Data File Sample Contents for HP ProLiant servers not using the Oxx ROM family	27
CONREP command file contents	28
Using HPRCU	28
HPRCU command-line syntax	29
HPRCU command line arguments	29
HPRCU return codes	29
HPRCU sample XML format	29
Using HPSSASCRIPTING	30
Capturing a configuration	30
Using an Input script	31
Creating an HP SSA script file	31
Sample custom input script	31
Script file options	33
Control category	34
Action mode	34
Method mode	34
Controller category	34
Controller	35
ChassisName	35
ClearConfigurationWithDataLoss	35
LicenseKey, DeleteLicenseKey	35
PreferredPathMode	35
ReadCache, WriteCache	36
RebuildPriority, ExpandPriority	36
SSPState	36
SurfaceScanDelay	37
Video performance options	37
Array category	37
Array	37
Drive	37
DriveType	38
OnlineSpare	38
Logical Drive category	38
ArrayAccelerator	39
LogicalDrive	39
LogicalDriveSSPState	39
ParityGroups	39
PreferredPath	39
RAID	39
Sectors	40
Size	40
SSPAdaptersWithAccess	40
StripeSize	40
HBA category	41
ConnectionName	41
HBA_WW_ID	41
HostMode	41
HP SSA scripting error messages	41
Using HPLPCFG	45
HPLPCFG command-line syntax	45
HPLPCFG command-line arguments	45
HPLPCFG return codes	46
HPLPCFG command-line examples	46
Using LO100CFG	47
LO100CFG command-line syntax	47
LO100CFG command-line arguments	47
LO100CFG return codes	47
LO100CFG command-file contents	48
Using HPQLAREP	48
HPQLAREP command-line syntax	48
HPQLAREP command-line arguments	49
HPQLAREP return codes	49
HPQLAREP command-line examples	50
Using HPONCFG	50
HPONCFG command-line syntax	50
HPONCFG command-line arguments	50
HPONCFG return codes	51
HPONCFG command file contents	51
Obtaining an entire configuration	51
Obtaining a specific configuration	52
Setting a configuration	53
HPONCFG command-line examples	53
5 Troubleshooting	54
Troubleshooting table	54
6 Support and other resources	55
Information to collect before contacting HP	55
How to contact HP	55
Subscription service	55
Related information	55
Scripting Toolkit support	55
Typographic conventions	56
HP Insight Remote Support software	56
HP Insight Online	56
7 Documentation feedback	58
Acronyms and abbreviations	59

Match case Limit results 1 per page

HPQLAREP command-line examples

hpqlarep

—

s hba.ini

generates

hba.ini

with the following content:

[HBA0]

WWID=11111111

HostAdapterBiosEnable=1

SelectBootEnable=1

BootDeviceWWID=

BootDeviceLUN[0]=

You must edit hba.ini and add the following boot device information:

[HBA0]

WWID=11111111

HostAdapterBiosEnable=1

SelectBootEnable=1

BootDeviceWWID=22222222

BootDeviceLUN[0]=3

You must then invoke the tool to load the contents of

hba.ini

input to the HBA NVRAM:

hpqlarep

–

l hba.ini

Using HPONCFG

HP offers support for the iLO features available on HP ProLiant servers with the HPONCFG utility.

HPONCFG is an online configuration tool used to set up and reconfigure iLO without requiring a

reboot of the server operating system. The utility runs in a command-line mode and must be executed

from an operating system command line.

HPONCFG enables you to initially configure features exposed through the RBSU or iLO. This utility

is not intended for continued administration. CPQLOCFG should be used for ongoing administration

of user rights and network functionality on the server.

Before using HPONCFG, the iLO Management Interface Driver must be loaded on the server.

HPONCFG displays a warning if the driver is not installed.

For more information, see the HP iLO website at

tp://w

.hp

.co

m/go/ilo

Also, see the

HP iLO 4 Scripting and Command Line Guide

(for Gen8 servers) on the HP website

tp://w

.hp

.co

m/go/pr

n8/doc

or the

HP ProLiant Integrated Lights-Out 3 v1.20

Scripting and Command Line Guide

(for G7 servers) on the HP website at

.hp

.co

m/go/ilo

HPONCFG command-line syntax

hponcfg [-help][/?][-reset][-f filename][-l filename]

[-w filename][-get_hostinfo][-m firmwarelevel]

IMPORTANT:

Because the

-w

argument does not capture certain types of information, such as

the administrator password, data files created with HPONCFG using the

-w

argument cannot then

be used as input files for HPONCFG, unless they are modified first.

HPONCFG command-line arguments

Description

Command-line argument

These arguments display simple help messages.

/help or /h

This argument resets the iLO to factory defaults.

-reset

Scripting Toolkit utilities