HP ProLiant SL2500 HP Scripting Toolkit 9.60 for Windows User Guide - Page 45
Using HPLPCFG, HPLPCFG command-line syntax
View all HP ProLiant SL2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Error code Error message Comment or clarification 2873 is not a Logical Drive command. The command does not belong in the Logical Drive section of the script file. 2874 is not an HBA command. The command does not belong in the HBA section of the script file. 2875 More than one command cannot - exist in the same section. 2876 Invalid physical drive count. The script specifies more drives than are available of the specified drive type. 2877 No spares available. No drives were found that could be used as spares for the specified array. 2878 Spare request for RAID 0 is invalid. RAID 0 does not support spares. 2879 Reset and reconfigure combined error. A controller reset with data loss was specified while in Reconfigure mode. 2880 Invalid drive type specified. - 2882 Invalid value for MNPDelay. Valid range - is 0 (disabled) to 60 minutes. 2883 Invalid controller configuration value. - Expecting Yes or No. 2884 Invalid value for QueueDepth. Valid range - is from 2 to 32, or Auto. Using HPLPCFG You must edit the text file to insert the WWID of the boot volume and the LUN number that the WWID boots from. The HPLPCFG utility discovers the WWID of the HBA in the server blade and writes the information in the text file. The text file presents the options in human readable format. The HPLPCFG utility updates the hardware with the boot volume WWID and boot LUN read from the text file. HPLPCFG command-line syntax hplpcfg -s filename hplpcfg -l filename hplpcfg -v [HBA0] WWID=11223344 HostAdapterBiosEnable=1 SelectBootEnable=1 BootDeviceWWID=22334455 BootDeviceLUN[0]=1111 HPLPCFG command-line arguments Command-line argument hplpcfg -s filename hplpcfg -l filename hplpcfg -v Where filename has the following format: [HBA0] WWID=11223344 HostAdapterBiosEnable=1 SelectBootEnable=1 Description This argument saves the HBA configuration to the filename. This argument loads the HBA configuration to the filename. This argument displays the tool version information. Section for each HBA Read-only variable Your input or current value when read from HBA Your input or current value when read from HBA Using HPLPCFG 45