HP ProLiant SL4545 HP ProLiant SL4500 Series Setup and Installation Guide - Page 29
Installing a management module, Push the I/O module handle up to lock it into place.
View all HP ProLiant SL4545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug telephone or telecommunications connectors into RJ-45 connectors. To install the component: 1. Release the I/O handle, and then push the I/O handle down. 2. Insert the I/O module into the chassis, and be sure it is fully seated. 3. Push the I/O module handle up to lock it into place. Installing a management module To install the component: 1. Be sure the handle is in the down position. 2. Insert the management module into the device bay, and press firmly until the module is seated. Installation 29
Installation 29
WARNING:
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into RJ-45 connectors.
To install the component:
1.
Release the I/O handle, and then push the I/O handle down.
2.
Insert the I/O module into the chassis, and be sure it is fully seated.
3.
Push the I/O module handle up to lock it into place.
Installing a management module
To install the component:
1.
Be sure the handle is in the down position.
2.
Insert the management module into the device bay, and press firmly until the module is seated.