HP ProLiant SL4545 HP ProLiant SL4545 G7 Server Node User Guide - Page 25
Installing the chassis, Installing hardware options, Installing a node into the chassis
View all HP ProLiant SL4545 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that: • The leveling jacks are extended to the floor. • The full weight of the rack rests on the leveling jacks. • The stabilizing feet are attached to the rack if it is a single-rack installation. • The racks are coupled together in multiple-rack installations. • Only one component is extended at a time. A rack may become unstable if more than one component is extended for any reason. WARNING: To reduce the risk of personal injury or equipment damage when unloading a rack: • At least two people are needed to safely unload the rack from the pallet. An empty 42U rack can weigh as much as 115 kg (253 lb), can stand more than 2.1 m (7 ft) tall, and might become unstable when being moved on its casters. • Never stand in front of the rack when it is rolling down the ramp from the pallet. Always handle the rack from both sides. Installing the chassis The chassis requires installation in a rack. Install the rack rails, and then install the chassis and other components. For more information, see the HP ProLiant SL4500 Series Setup and Installation Guide and the Quick Deploy Rail System Installation Instructions that ship with the rack hardware kit. Installing hardware options Install any hardware options before initializing the node. For options installation information, see the option documentation. For node-specific information, see "Hardware options installation (on page 28)." Installing a node into the chassis Install the component as indicated. Setup 25