HP Scanjet 4670 HP Scanjet 4600 series see-through scanner user manual - Page 7
Place the scanner in the holder, HP Scanjet 4650/4670 scanner - vertical scanner
View all HP Scanjet 4670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
How to use the scanner 3 1 2 4 HP Scanjet 4650/4670 scanner 1 Scanner 2 Vertical holder, with folding legs for storage. Used for positioning and holding items for scanning 3 Optional transparent materials adapter (TMA) for scanning 35 mm slides and negatives. 4 Power supply Place the scanner in the holder Note The holder can be used for holding the scanner, positioning items to scan, and providing a flat surface on which to scan. The holder is not necessary for scanning. Place the scanner in the horizontal holder (HP Scanjet 4600/4630) 1 Set the horizontal holder on a flat surface. Make sure the hinge in the holder is rotated forward. 2 Lay the scanner on the holder, viewing side (light frame) up ( ), in contact with the hinge. The buttons face away from the hinge. The cord exits the scanner next to the hinge. 3 Press the back of the scanner down until it clicks into place in the hinge. Place the scanner in the vertical holder (HP Scanjet 4650/4670) 1 Make sure both legs are fully extended before placing the scanner in the holder. This ensures the holder is stable. Open the support legs by rotating them into place: a Open the rear support first, and then make sure it clicks into the fully open position. b Rotate the front support from behind the holder to the front of the holder until it clicks into place. 2 Set the holder on a flat surface. User's Manual 3